Video: 4 New Inventor Tips

Announcement
July 18, 2016

Posted on July 18, 2016 by Synergis Manufacturing Applications Consultant, Dave Breiner 4 new Inventor tips and tricks all packed into this 9-minute video: Slice Graphic Placing Holes on a sketch Controlling and Suspending Auto Constraints in a sketch Adding an Offset Plane while in Sketch Mode [youtube https://www.youtube.com/watch?v=3wxyyrRcM8Q&w=560&h=315]

Creating Plastic Features in Inventor – Ribs

Announcement
July 17, 2013

Posted on July 17, 2013 by Jim Swain, Project Manager, Manufacturing Solutions: Inventor’s plastic part design tools simplify the creation of many types of features common to plastic parts.  This tip will look at the Rib tool. The Rib tool allows the easy creation of free-standing or connected thin walls.  It uses a single sketch […]

AutoCAD Electrical Tools You Should Use

Announcement
February 11, 2013

Posted February 11, 2013 by Todd Schmoock, Manufacturing Solutions Engineer: When working in AutoCAD Electrical there are several tools you should be using on a regular basis if you want projects to remain accurate. Many times people use AutoCAD Electrical and get frustrated when their projects do not run reports correctly, or do not seem […]

Things You Should Know When Installing AutoCAD Electrical

Announcement
February 4, 2013

February 4, 2013, posted by Todd Schmoock, Manufacturing Solutions Engeineer: You are planning to install AutoCAD Electrical, but you are not sure how to configure the installation correctly.  Most will simple click the install button only to find out you didn’t install all the features until after you installed the software and start using it.  […]

Autodesk Inventor Design Accelerator: Tolerance Calculator

Announcement
January 30, 2013

January 30, 2013, post by Robert Reid, Manufacturing Solutions Engineer: The “Tolerance Calculator” helps the end user to perform calculations of closed linear dimension chains within the Part environment, or the Assembly environment. The calculator can work in the following two basic modes: • Calculation of the resulting dimension including tolerances (check calculation): Performs a […]

Five Quick Tips for AutoCAD Civil 3D Grading

Announcement
January 29, 2013

Januray 29, 2013, post by Nikki Szymanski: As I go onsite to different clients, I come accross some tricks that not everyone uses, but could save you a lot of time.  Here’s five that I often give to the firms I visit: 1.  Extract Contours from a Surface:  Use extract objects for surface. Surface>Utilities> Extract objects […]

Inventor 2013 Design Accelerators – Functional Design: Key Connections

Announcement
January 23, 2013

January 23, 2013 by Robert Reid, Manufacturing Solutions Engineer: Download the full whitepaper. Functional Design Definition: Functional design is a knowledge content tool that represents the trend to move from geometrical descriptions to capturing knowledge. Designers use functional design to analyze the function of their products and the design problems they are trying to solve, […]

Important: Installing Multiple AutoCAD Products

Announcement
January 16, 2013

January 17, 2013, posted by Darin Green, Synergis Helpdesk: We often receive calls from clients who get an error message pointing “Failed installation aborted, Result 1603”.  To help, I thought I would put this popular topic online to help with your service.  If this doesn’t solve your problems, feel free to contact us for any help. […]

3ds Max: How to Use the Bevel Profile Modifier

Announcement
December 10, 2012

Bill McKown is at it again.  This week he is giving a tip about Autodesk 3ds Max (or 3ds Max Design).  Here is a quick video tip about using the Bevel Profile Modifier feature where he demonstrates how to create a raised wood wainscot panel.  [wpvideo FnTiGykb] Check our YouTube Channel for more video tips […]

Synergis Revit Tech Tips – New Videos Added!

Announcement
November 26, 2012

Synergis has the experts with the answers.  Need a feature review, have a question on how to design something?  Ask us!  Contact us at events@synergis.com with any of your questions and we will work on a video to answer your questions or find easier solutions. We have an on-going SynergisCAD YouTube Channel with a special series […]

Synergis Technologies. ©2020 - All Rights Reserved.

img

Synergis Technologies. ©2020 - All Rights Reserved.