Tips & Tutorials Blog: iProperties

Posted on November 16, 2016 by Synergis Manufacturing Applications Consultant, Dave Breiner One thing that I have noticed as a near constant are mistakes forgetting to update drawing notes after making changes to the model. We are often under time pressure, product design pressure and the pressure to get products updated and out as fast as possible. With […]

Posted on July 13, 2016 by Synergis Manufacturing Applications Consultant, Dave Breiner Here is an easy way to fill in iProperties of parts in an assembly by using the BOM in an Assembly model. [youtube https://www.youtube.com/watch?v=VJJTlpb5fE8&w=560&h=315]

In this short YouTube video, Synergis Applications Consultant Dave Breiner shares how to create parts that use iLogic to help you fill out some of the iproperties automatically dependent on your inputs. The video will show how easy it can be to setup a rule that will fill out the iproperties based on parameters and […]

Posted on September 21, 2015 by Synergis Applications Consultant, Dave Breiner and Manufacturing Product Support Specialist, Mark Lancaster Mark Lancaster mentioned that a few customers were asking if there was an easy way to add virtual parts to an assembly. We said of course! Many companies have any number of items that are typically added […]

Posted on March 28, 2014 by Mark Lancaster, Synergis Product Support Specialist: In this final installment of this series in working with Content Center, I am covering the Content Center editor interface and also start to walk you through the creation (copying) of a family table and how it gets populated. In case you missed […]