Synergis Express Learning Webinars

Synergis Express Learning Webinar: Inventor Sketching

Learn the Do’s and Don’ts of proper sketching techniques within Inventor from Synergis’ Dave Breiner.

Watch

Synergis Express Learning Webinar: 2D Sketch Constraints

Learn about at 2D Sketch Constraints, how and when to use them along with how to delete them from Synergis’ Dave Breiner.

Watch

Synergis Express Learning Webinar: Reference Templates; how to maintain company standards

See how to maintain company standards from Synergis’ Kevin Spear. Learn what’s changed between Civil 3D 2016 and 2017 and how with the latest release, reference templates are copied into the drawing, and the connection between the drawing and the reference templates is maintained.

Watch

Synergis Express Learning Webinar: Inventor Styles Conflict

Have you ever seen this message or continue to see this message when you start an Inventor drawing? Synergis’ Mark Lancaster shows you why this is occurring and how to resolve it.

Watch

Synergis Express Learning Webinar: Working with Level of Details (LODS) - Part 1

A question we often hear, should I be using Level of Details in my model or can I accomplish the same by using View Representations. Learn how they should be used as Synergis’ Mark Lancaster takes you through working with LODS and View Representations.

Watch

Synergis Express Learning Webinar: Revit Families – Basics to parametrically driven families

Our technical team gets a lot of questions about families. Learn all about Revit families from Synergis’ Darin Green.

Watch

Using the Copy Design Tool Inside of Vault

Learn how to use the Copy Design Tool Inside of Vault from Synergis’ Joe Corson.

Watch

Inventor Assembly Productivity Tools

Are you missing out on the Inventor Assembly tools located under the Assemble/Productivity section of the ribbon? Many times we hear “I didn’t even know that function was there.” Join Synergis’ Mark Lancaster as he shows you what these tools can offer.

Watch

Introduction to Inventor iParts

Although Inventor iParts have been around for many releases, due to recent feedback it’s time to have a refresher course on this modeling technique. Synergis’ Mark Lancaster shows you more about iParts and/or what it can do for you.

Watch

Inventor iParts – Advanced

Did you know there’s a custom iPart type? What about controlling where your iPart members are placed? Or that you can apply different sheet metal rules to a (Sheet Metal) iPart members? Learn more about these advanced topics for iParts from Synergis’ Mark Lancanster.

Watch

Inventor Direct Editing

Ever since Inventor 2015, did you know you can “direct edit” (imported) 3D models from other CAD applications/file types? Never heard of Direct Editing or perhaps you want to learn more about this function? Join Synergis’ Mark Lancaster as he shows you all about Direct Editing.

Watch

Cross-Industry

Understanding the New Autodesk Subscription Model and How It Impacts You

You may be aware that Autodesk recently announced a move to a subscription business model. Synergis is here to help you understand the timing of these announcements, how these changes may affect you, and to help you make the best licensing decisions for your organization. If you missed our webcast in April, you can view the recording or connect with us.

Watch

Subscribing, Maintenance, Benefits, and More with your Autodesk Software

Find out what you need to know about subscribing, maintenance, and benefits you have with your Autodesk solutions, but may not be using.

Watch

Planning for your CAD Future

Join Robert Green for this fast paced webinar covering all the parameters organizations need to think about when planning for their CAD future. Including licensing policy changes from Autodesk, hardware technology planning, work process optimization, and training program integration.

Watch

60 AutoCAD Tips in 60 Minutes with Special Guest, Lynn Allen

Join Cadalyst Columnist and Autodesk Technical Evangelist Lynn Allen as she takes you through a whirlwind of productivity techniques that are certain to improve your everyday drawing life.

Watch

Customizing my AutoCAD Ribbon

Learn how to create your own ribbon (tab) in AutoCAD and populate it with the commands you require for your job.

Watch

Autodesk Licensing

Darin Green, Product Support Specialist, explains how Autodesk licensing works and how to make the most out of the licenses you own. He reviews common issues, option files, and reporting tools that will save you time and money.

Watch

Autodesk Account: A more effective way to manage your software and services

On March 13, 2015 Autodesk moved from Subscription Center to Autodesk Account. With the Autodesk Account you can easier manage your products, services, and Subscription benefits. This webcast will walk you through the Autodesk Account and make sure you’re using all of its features.

Watch

Desktop Subscription and Autodesk Changes

Product Support Specialists, Darin Green and Mark Lancaster provide an overview of the Autodesk Subscription program, using Autodesk Account, how to download the latest software releases and the benefits of desktop subscription.

Watch

Architecture, Engineering, and Construction

See how to connect project data, communication, and your entire project team with Collaboration for Revit

Today’s need for real-time project communication throughout the design and engineering process is more critical than ever. Socializing coordinated files throughout the project team allows for immediate feedback through mobile devices. See how you can enable dispersed project teams to work concurrently on Revit central files, communicate with the team directly through the Revit environment, remove the limitations of firewalls, or concerns for IT setup, and extend BIM or CAD file viewing capabilities on mobile devices.

Watch

BIM Coordination for Construction

As more and more building projects leverage BIM, more and more companies struggle with aligning themselves with new processes and technologies surrounding model coordination. Designers and construction professionals, start small and aim big. Here we take a quick look at some of the various collaborative coordination technologies and workflows that your company can adopt as it strives to leverage BIM.

Watch

The Best of Both Worlds: Using Revit and AutoCAD Together

It is a common misconception that once you start using Revit you will abandon AutoCAD. This is not true. What about the 1,000’s of drawing you created over the years? In this webcast we will show you how to use AutoCAD and Revit together to streamline your workflow.

Watch

A360 Collaboration for Revit

Connect your project teams with centralized access to BIM project data in the cloud, with no need for costly IT setup. With Revit and Autodesk A360 integration, the entire project team in able to view, search, and socially interact on models.

Watch

Project Collaboration and Project Management for Architecture, Construction, and Building Design

Autodesk Vault Professional data management software helps AEC professionals organize, manage, share, and track project design data, workflows, and documentation throughout the BIM process. Gain more control over your design data with revision management capabilities, quickly find and reuse your design data, and more easily manage and share your design, engineering, and construction information.

Watch

Civil Infrastructure and Utilities

Storytelling 101: Delivering an AEC Project Proposal in Infraworks

Synergis Applications Consultant, Kevin Spear PE takes a look at the tools inside Infraworks 360 to present designs and use them to collaborate with various agencies and stakeholders involved in your project.

Watch

Stormwater Pipe Design Using SSA

During this webcast, Kevin Spear shares how to get setup with AutoCAD Civil 3D and Storm and Sanitary Analysis as well as the workflow to model and analyze storm sewer pipes.

Watch

Visualize, Collaborate, and Validate with Autodesk Infrastructure Design Suite

With Civil 3D inside the Autodesk Infrastructure Design Suite, you have the tools – and this webinar will show you how to use them. From conceptual to final design, take designs from Infraworks to Civil 3D, and back. See how the data dynamically updates, seamlessly.

Watch

Civil Engineering Data Translator: Free Service for Civil 3D Subscribers

The new Civil Engineering Data Translator is a Subscription-only service that extends the functionality of AutoCAD Civil 3D by providing the ability to share civil engineering project design data between civil software environments by providing bi-directional conversion of AutoCAD Civil 3D and Bentley InRoads and Bentley GEOPAK project data.

Watch

Use Drone Technology to Improve Accuracy and Efficiency

How accurate are your volumetric calculations? How long do these calculations take? Synergis’ Kevin Spear will show you leveraging drone technology can improve accuracy, efficiency, and safety.

Watch

Project Collaboration and Data Management for Infrastructure Design Suite

Data management software helps organize, manage, and track data creation, analysis, and documentation processes for design, engineering, and construction teams. Get more control over design data with revision management capabilities. Quickly find data and reuse data to easily manage your design and engineering information.

Watch

Manufacturing Design

Autodesk Fusion Lifecycle (PLM 360) Webinar Series – Part 1, New Product Development / Introduction

Would you like to improve the quantity, speed, or accuracy (or all three) with which your business delivers new products to the market? Learn how PLM 360 can manage your new product development process and reduce time to market, improve productivity, and provide visibility to delays and bottlenecks.

Watch

Autodesk Fusion Lifecycle (PLM 360) Webinar Series – Part 2, Items, Bills of Material, and Change Management

Are your items, bills of materials, and changes all managed effectively? And in a single location? Learn how PLM 360 can be that single location to efficiently and effectively manage all this critical business data and processes. And see how this would reduce errors, improve productivity, improve reuse, improve access to relevant information, and reduce delays for your business.

Watch

Autodesk Fusion Lifecycle (PLM 360) Webinar Series – Part 3, Quality Management

Are your Quality data and processes effectively managed and informing all the appropriate people at the appropriate times? Are your Quality management processes part of a closed loop system that directly drives engineering changes? Learn how PLM 360 can manage your quality data and processes and lead to improved productivity, reduce delays, and improve access to relevant information.

Watch

Factory Design: See the Advantages of Laser Scanning

To be sure the data you are using to design or reconfigure your factory is as accurate as possible, the industry is moving away from relying on potentially out-of-date CAD drawings for capturing as-built facilities. Scanning is the most easily attainable and reliable source of truth and is used in conjunction with CAD. And, scanning improves safety by reducing the accidents and exposure that can happen when taking manual measurements.

Watch

PDM to PLM Integration

See how to integrate product data management (PDM) into a product lifecycle management tool and how tying the design critical information stored by engineering in PDM to the downstream processes that flow through the rest of the organization save time and improves quality.

Watch

Increase Your Productivity with Autodesk Vault

Engineers waste, on average, 15% of their time managing data. Better manage, track, and organize your product design data with Autodesk Vault. See how you can use Vault for projects and reporting, managing Outlook communications, and involve non-CAD users in the engineering process.

Watch

Fusion 360: Digital Prototype Faster, Work Anywhere, and Share with Anyone

Learn how Fusion 360 can complement your workflow. Fusion 360, a 3D CAD/CAM tool, is the only cloud-based tool that combines industrial and mechanical design. The collaboration and product development tools allow you to take your drawings to the next level.

Watch

Copying Your Designs Using Inventor

Do you need to copy your Inventor models to create a new design? If you have Vault, this can easily be accomplished through the (Vault) Copy Design workflow. But what if you didn’t have Vault, how would you accomplish this? Watch this webcast and Mark Lancaster, Synergis Product Support Specialist, will demonstrate several workflows within Inventor that will allow you to create a new design from your model.

Watch

Nastran In-CAD: The CAD-embedded Finite Element Analysis Tool

Nastran In-CAD offers more powerful analysis tools than what has previously been available with the Inventor environment. Watch this webinar now to take a look at Nastran In-CAD’s workflow and how it can be used to solve several different types of problems. Examples include a buckling and impact study.

Watch

Get Control of Your Bill of Materials

During this webinar, we will take a close look at Autodesk PLM 360’s approach to simplifying the experience when working with BOM’s and improving operational efficiency and accuracy.

Watch

6 Critical Steps to Implementing Data Management

Data management solutions always look good “on paper”. If you don’t have a clear, strategic implementation plan in place, who knows what could happen. You need a plan. And Synergis has a proven plan.

Watch

For more webinars, visit our YouTube channel today.

What our Clients are Saying

“We attended a week-long training held at one of Synergis Engineering Design Solutions state of the art classrooms and that training allowed us to turn off AutoCAD and use Revit right away.”

Kyle Van Dyke, KVD Studio
arrow down

Ready to Get Ahead? We Can Help!

Contact Us