Webinar - April 13, 2021 - 11:00 AM to 12:00 PM
Learn to be an expert in Autodesk Fusion 360 and Autodesk Inventor
Tuesday, April 13, 2021 @11:00 AM EST.
Are you an Autodesk Inventor user curious about Autodesk Fusion 360? Are you wondering when to use Inventor versus when to use Fusion 360?
Inventor and Fusion 360 are both powerful modeling tools, and similar in many ways. But they’re also different in their workflows, so trying to run Fusion 360 just like Inventor can be frustrating.
As a longtime Inventor user, Applications Consultant Jim Swain found Fusion 360 workflows to be close enough to Inventor to be easily accessible, but different enough to be challenging. So if you’re already comfortable using Inventor, why bother with Fusion 360?
During this live webinar Jim will tell you exactly why you should bother! You’ll learn about different situations where you should use Fusion 360 Instead of Inventor, like utilizing Fusion 360’s easy simulation analysis and 3D machining tools. You’ll get an overview of the differences of each platform, so you’ll know exactly when and why to use each one.
So, if you’re and Autodesk Inventor user curious about Fusion 360, join us for this live webinar and become an expert in both!